Telehandler Parts
 

This page has just a small example of telehandler and forklift spare parts that are available.

Parts are available for collection or can be delivered direct to your door through out the UK.

For Parts enquiries please contact us on

01869 336248 / 07966 593526 andrew@aandrhandling.co.uk

(please have your machine model age and serial number to hand)

 

OEM quality replacement starter motors are available for most makes of telehandlers and tractors. These high powered starters will crank the engine over faster than ever before even on the coldest of mornings. Iskra was renamed to Letrika from 21st August 2012. Beware of the cheap replacement Lucas style copies that have flooded the market! (Buy cheap buy twice)

 

4.2kw Iskra starter motors

4.2kw Gear reduction high powered starter motor. For Perkins 1000 and 1100 series engines. Applications include Matbro, Manitou, Sanderson, JCB, Terex etc. (Right & Left hand versions available)

£180 + vat inc delivery to most of the UK

3.2kw Iskra starter motors

3.2kw high powered starter for perkins 1000 and 1100 series engines. Commonly found on Manitou telehandlers. Very compact compaired to the old style Lucas starters previously used by Perkins.

£180 + vat inc delivery to most of the UK

 

Perkins Timing Case

Cast steel Perkins timing case kit for Manitou MLT 627 telehandlers to replace the standard aluminium case which is prone to cracking due the high stress's of the later type hydraulic pump fitted from 2009.

Kit will include all required parts to modify your machine.

£POA

Steering

Manitou MLT 526 and 627 track rod ends complete with both sections for Dana Spicer axles. Also suitable for Terex 2506 Handlers.

 Part number 601557 replaced by 894406

£165 + vat each inc delivery to most of UK

Track rod ends to suit most makes of machines available.

 

Clark Hurth Dana Spicer UJ

Heavy Duty aftermarket Greasable Universal Joint for Telehandlers with Clark Hurth and Dana Spicer axles. Sold in pairs

£150 + vat

Manitou & New Holland

Boom Extension and Aux solenoid for Manitou & New Holland Handlers

£612 + vat inc delivery to most of UK

Perkins Thermostat Housings

Genuine Perkins thermostat housing and connection suits many applications

£POA + vat inc delivery to most of UK

Perkins Electric fuel pump

Genuine Perkins latest style electric lift pump for 1100 series engines

suits many makes of telehandlers and Tractors.

£180 + vat inc delivery to most of UK

 

Grammer Air Seat

12 volt Air seat, Suits several Manitou models.

£490 + vat inc delivery to most of uk

Carraro Axle Casings

 

Service exchange Carraro front axle casings with lower king pin bearing holder bored out and a steel top hat sleeve welded in bring them back to standard size. Suits Matbro, Sanderson and some Manitou handlers. Subject to availability.

£POA

 

Redrock / Sanderson Wear pads

Discounts available for multiple orders £48.50 each + vat

14mm thick Pads for Sanderson handlers also available

Joystick Rubber Buttons

Joystick Buttons available to suit many common handlers

£3.98 each + vat (min order of 4) plus postage

Contact me to see which buttons are suited to your machine

 

Manitou Cardan Shaft

Manitou Engine to Transmission propshaft.

Part number 224734, Fits many MT & MLT machines

 a longer version also available for bigger construction spec machines like MT845, 1232 1337 etc

£565 + vat

Manitou Cardan Shaft Upgrade

 


Part Number 796726 replaces propshaft 224734 depending on serial number

£730 + vat including delivery to most of UK

 

Steering Ram Bearing

Genuine OEM Sanderson steering ram bearings suits many models like 622, 623, 624, 725, 726 etc. This is the original style one piece bearing not a standard 25mm id bearing with reducing bushes/spacers down to 22mm.

£25  + vat each or a pair for £45 + vat including delivery to most of UK

Sanderson Steering Ram

My own redesigned Sanderson replacement steering ram for 622, 623,624,625, 725, 726 etc

This is a brand new direct replacement for the original ram, it has a screw in end cap/gland instead of the old end cap held in with a circlip which often leaked.

£365 + vat including bearings

 
 

Prices advertised are a guide and can change according to suppliers price changes, however all efforts are made to ensure advertised prices are as up to date as possible but please call for an exact quotation.

 
 
 
 
Telehandler parts